Key takeaways
- Compare the best motorized TV mounts, from flip-down ceiling models to a motorized fireplace pull-down, with capacities, VESA ranges and controls.
A motorized TV mount moves the screen with a motor instead of muscle, so the TV folds down from the ceiling, drops to eye level over a fireplace, or tucks itself away at the press of a button. The best motorized TV mounts for most homes are the VIVO MOUNT-E-FD70 if you want smart controls on a ceiling mount that also works on a pitched roof, the Perlegear PGCM12B for the heaviest TVs and the widest swivel, and the Mount-It! MI-386W if the TV lives above a fireplace and needs to come down for viewing.
Every pick in this roundup is a powered model with a published weight rating, a stated VESA range, and remote control. Four are ceiling mounts that flip the TV down from a folded position, and one is a wall mount that pulls the TV down over a mantel. The differences that matter are how the mount moves, how much weight it carries, which ceilings or walls it can anchor to, and how you control it. As an Amazon Associate, we earn from qualifying purchases.
Table of Contents
- How to Choose a Motorized TV Mount
- Quick Comparison
- 1. VIVO Electric Ceiling TV Mount (MOUNT-E-FD70)
- 2. Perlegear Electric Ceiling TV Mount (PGCM12B)
- 3. Mount-It! Motorized Fireplace TV Wall Mount (MI-386W)
- 4. THEGA Electric TV Ceiling Mount
- 5. Perlegear Electric Ceiling TV Mount (PGCM10)
- Before You Buy: Structure, Power and Clearance
- FAQ
- Conclusion
- Product and ASIN Reference
How to Choose a Motorized TV Mount
Start with the movement type, because it decides where the mount can go. A flip-down ceiling mount folds the TV flat against the ceiling and rotates it down into viewing position, which suits bedrooms, kitchens, patios, and rooms where wall space is taken up by windows or shelving. A pull-down fireplace mount stays on the wall and lowers the TV vertically, which suits the common above-mantel install where the resting position is too high for comfortable viewing. A telescopic ceiling mount drops the TV straight down on a column, which suits high ceilings.
Next, match the weight rating to your TV with headroom to spare. Published capacities in this roundup run from 77 to 110 lb, and the TV’s weight without its stand is the figure to compare. Staying well under the limit matters more on a motorized mount than on a fixed one, because the motor, gears, and pivot joints carry the load every time the mount moves, not just while it hangs still.
Check the VESA pattern on the back of your TV against the mount’s published range. All five picks here cover the common patterns up to at least 600×400 mm, but the mounting-hole spacing on very large or older panels can fall outside a smaller mount’s rails. Measure the horizontal and vertical hole spacing in millimeters before ordering.
Finally, look at the structure the mount anchors to and the ceiling type it is built for. Ceiling mounts need joists, wood, or solid concrete to bolt into, and some are rated for pitched or sloped ceilings while others are flat-roof only. Fireplace mounts need a solid wall or double studs. Every motorized mount also needs a power outlet within reach of its adapter, and that outlet location is worth planning before the mount goes up.
Quick Comparison
| Product | Type | TV Size | Capacity | Control |
|---|---|---|---|---|
| VIVO MOUNT-E-FD70 | Flip-down ceiling | 32 to 70 in | 77 lb | Remote, app, voice |
| Perlegear PGCM12B | Flip-down ceiling, full motion | 32 to 75 in | 110 lb | App and remote |
| Mount-It! MI-386W | Pull-down fireplace wall | 37 to 70 in | 77 lb | Remote |
| THEGA Electric Ceiling Mount | Flip-down ceiling, telescopic | 50 to 90 in | Not stated | Remote or switch |
| Perlegear PGCM10 | Flip-down ceiling | 32 to 70 in | 88 lb | Remote |
1. VIVO Electric Ceiling TV Mount (MOUNT-E-FD70)
The VIVO MOUNT-E-FD70 is the most flexible ceiling mount in this roundup, because it is built for both flat and pitched ceilings and pairs its RF remote with app and voice control. The mount flips a TV down from a folded position against the ceiling, and the Tuya app support means Alexa and Google Home can run the movement once it is set up, with memory presets saving a favorite viewing angle.
The published ratings cover TVs from 32 to 70 inches and up to 77 lb, with VESA patterns from 200×100 to 600×400 mm. The flip-down travel runs from flat against the ceiling to a 75 degree downward tilt, and a leveling adjustment of plus or minus 2 degrees lets you square the screen after installation. The alloy steel frame folds to a shallow profile, so the parked TV sits close to the ceiling.
The trade-offs are the capacity and the control setup. At 77 lb, this is not the mount for the heaviest large panels, and app pairing adds a setup step that a remote-only mount skips. For a pitched-roof room, a bedroom, or a covered patio with a mid-weight TV, it is the most complete package here.
Specs
- Model: MOUNT-E-FD70
- Mount type: Electric flip-down ceiling mount
- Ceiling types: Flat and pitched
- TV size: 32 to 70 in
- Weight capacity: 77 lb (35 kg)
- VESA compatibility: 200×100 to 600×400 mm
- Flip-down tilt: 0 to -75 degrees
- Screen leveling: +2 to -2 degrees
- Control: RF remote, Tuya app, Alexa and Google Home, memory presets
- Material: Alloy steel
- Dimensions: 20 x 6 x 4.3 in
- Item weight: 22.3 lb
2. Perlegear Electric Ceiling TV Mount (PGCM12B)
The Perlegear PGCM12B is the heavy lifter of the group. Its published rating is 110 lb for TVs from 32 to 75 inches, the highest capacity in this roundup, and it adds a motorized swivel of 90 degrees in each direction on top of the flip-down movement. That swivel is what separates it from a basic flip-down mount: the TV can face a seating area that is not directly in front of the mount, which suits open-plan rooms and patios.
The flip-down tilt runs from 0 to 80 degrees, the VESA range covers 200×100 to 600×400 mm, and control is split between the included remote and an app. Perlegear lists this model for flat roofs, so pitched-ceiling installs belong to the VIVO above. The listing data reviewed does not publish the mount’s material or its own weight, so both are marked as not stated rather than estimated.
Choose the PGCM12B when the TV is large and heavy, when the seating is off to one side, or when a ceiling mount needs to serve two viewing spots. If your ceiling is sloped, or your TV is small enough that 110 lb of capacity is wasted, the simpler picks below make more sense.
Specs
- Model: PGCM12B
- Mount type: Electric flip-down ceiling mount, full motion
- Ceiling types: Flat roofs
- TV size: 32 to 75 in
- Weight capacity: 110 lb
- VESA compatibility: 200×100 to 600×400 mm
- Tilt: 0 to 80 degrees
- Swivel: +90 to -90 degrees
- Control: App and remote
- Material: Not stated
- Item weight: Not stated
3. Mount-It! Motorized Fireplace TV Wall Mount (MI-386W)
The Mount-It! MI-386W solves a different problem from the ceiling mounts: a TV mounted above a fireplace sits too high for comfortable viewing, so this wall mount pulls the screen down and out over the mantel at the press of a remote button. The published height adjustment is up to 21.3 inches of travel on a 101 degree pull angle, which brings the screen down toward seated eye level and forward past the mantel shelf.
The ratings cover TVs from 37 to 70 inches and up to 77 lb, with VESA patterns from 200×100 to 600×400 mm. The mount extends from 5.7 inches off the wall in the raised position to 19.1 inches when lowered, and after the motor does the vertical work you can still swivel the TV 25 degrees each way and tilt it 3 degrees by hand. It anchors to a solid wall or to double studs at 16 inch spacing, and this listing is the white finish.
The limits are the ones every fireplace mount shares: the mantel depth decides how high the mount must sit to clear the shelf on the way down, and the 77 lb ceiling excludes the heaviest oversized panels. Measure the mantel and check the manual’s clearance chart before ordering. For the classic over-fireplace install, nothing else in this roundup does the same job.
Specs
- Model: MI-386W (white finish)
- Mount type: Motorized pull-down fireplace wall mount
- TV size: 37 to 70 in
- Weight capacity: 77 lb (35 kg)
- VESA compatibility: 200×100 to 600×400 mm
- Height adjustment: Up to 21.3 in of travel
- Pull angle: 101 degrees
- Swivel: +25 to -25 degrees (manual)
- Tilt: -3 degrees (manual)
- Extension from wall: 5.7 to 19.1 in
- Installation: Solid wall or double studs at 16 in spacing
- Item weight: 27.2 lb
4. THEGA Electric TV Ceiling Mount
The THEGA ceiling mount is the pick for very large TVs. Its published size range runs from 50 to 90 inches, wider than anything else here, and the design combines a flip-down hinge with a telescopic drop of 6.2 to 42.3 inches, so the TV can hang lower from a high ceiling before it tilts into viewing position. Tilt travel is 0 to 85 degrees, with a leveling adjustment of plus or minus 2 degrees.
Control is by remote or a wired switch, and the mount saves a memory position so the TV returns to the same angle. The frame is cold rolled steel, the input voltage is 110 to 240V, and the mounting holes fit patterns within a 600×600 mm area.
One caution is stated plainly: THEGA’s listing data does not publish a clean weight capacity, and the weight figures that do appear in it conflict with each other, so the capacity is marked as not stated in the specs below. If your panel is heavy, confirm the rating with the seller before mounting. Buyers with a very large but reasonably light TV, and a ceiling high enough to use the telescopic drop, are the audience for this one.
Specs
- Model: Not stated
- Mount type: Electric flip-down ceiling mount with telescopic drop
- TV size: 50 to 90 in
- Weight capacity: Not stated
- Mounting pattern: Hole spacing within 600×600 mm
- Tilt: 0 to 85 degrees
- Screen leveling: +2 to -2 degrees
- Telescopic length: 6.2 to 42.3 in
- Control: Remote control or switch, memory setting
- Material: Cold rolled steel
- Input voltage: 110 to 240V
- Item weight: 22 lb
5. Perlegear Electric Ceiling TV Mount (PGCM10)
The Perlegear PGCM10 is the straightforward remote-only ceiling mount in this roundup. It flips a TV down from the ceiling through a 0 to 75 degree tilt range, carries up to 88 lb, and covers TVs from 32 to 70 inches with VESA patterns from 200×100 to 600×400 mm. That capacity sits between the VIVO and its bigger PGCM12B sibling, and for most mid-size and large TVs it is more than enough.
The manual specifies installation into a wood or solid concrete ceiling and an input voltage of AC 100 to 240V. There is no app and no voice control on this model, which is the point: the remote runs the motor, memory is not part of the package, and there is nothing to pair or configure. The listing data reviewed does not publish the mount’s material or item weight.
Pick the PGCM10 when the ceiling is flat, the TV is a mainstream size and weight, and you want motorized movement without smart-home setup. If you need app control, a swivel, or a pitched ceiling, the VIVO and the PGCM12B above are the step-ups.
Specs
- Model: PGCM10-US
- Mount type: Electric flip-down ceiling mount
- Ceiling types: Flat roofs; wood or solid concrete ceiling per the manual
- TV size: 32 to 70 in
- Weight capacity: 88 lb (40 kg)
- VESA compatibility: 200×100 to 600×400 mm
- Tilt: 0 to 75 degrees
- Control: Remote control
- Input voltage: AC 100 to 240V
- Material: Not stated
- Item weight: Not stated
Before You Buy: Structure, Power and Clearance
Three checks decide whether a motorized mount install goes smoothly. First, structure: ceiling mounts must bolt into joists, wood, or solid concrete, never into drywall alone, and fireplace mounts need a solid wall or double studs. Find the joists or studs and confirm their spacing matches the mount’s plate before you order, because a motorized mount adds moving loads that a static mount never applies.
Second, power: every mount here is a powered appliance that needs an outlet within reach of its adapter cord. Plan the outlet and the cable path for the TV’s own signal leads at the same time, remembering that the screen travels through an arc or a vertical drop, so cables need slack through the full range of movement.
Third, clearance: a flip-down TV sweeps through the space below the ceiling, a fireplace mount needs the mantel depth measured against the manual’s chart, and a telescopic mount needs its drop range checked against ceiling height and seating. Measure all three, keep people and furniture out of the travel path, and follow the maker’s manual for the final torque and leveling steps.
FAQ
Do motorized TV mounts work on sloped or pitched ceilings?
Some do and some do not, and the listing or manual for each model says which. In this roundup the VIVO MOUNT-E-FD70 is built for flat and pitched ceilings, while both Perlegear models are listed for flat roofs. Installing a flat-only mount on a slope leaves the TV hanging at the ceiling’s angle, so match the mount to the ceiling before anything else.
How much weight can a motorized TV mount hold?
Published ratings in this roundup run from 77 lb on the VIVO and Mount-It! models to 110 lb on the Perlegear PGCM12B. Compare the rating with your TV’s weight without its stand, and leave headroom rather than running at the limit, because the motor and pivots carry the load every time the mount moves. One pick here, the THEGA, does not publish a clean capacity figure, which its section flags.
What happens to a motorized TV mount when the power goes out?
The mount simply stays where it is; a flip-down TV remains folded or lowered in its current position until power returns. There is no spring or counterweight driving it back. Plan the install so a parked TV never blocks a door, a walkway, or the fireplace itself if the power fails while it is down.
Can one person install a motorized TV mount?
Plan on two people. The mounts themselves weigh between about 22 and 27 lb where published, the TV has to be lifted and held against the bracket while it is secured, and the ceiling or wall plate must be leveled and torqued into joists or studs. A second pair of hands is also the safer way to run the first powered cycle and check the travel path.
Conclusion
A motorized mount earns its place when a fixed mount forces a bad viewing angle or an unreachable TV. Choose the VIVO MOUNT-E-FD70 for pitched ceilings and app or voice control, the Perlegear PGCM12B for heavy TVs and a motorized swivel, the Mount-It! MI-386W to bring an over-fireplace TV down to eye level, the THEGA for very large screens on high ceilings, and the Perlegear PGCM10 for simple remote-only flip-down duty. Confirm the weight, the VESA pattern, and the structure behind the ceiling or wall first, and any of the five will move the screen so you never have to.
- Best HDMI Matrix Switchers: 5 Picks for Multi-Room Setups
- Best 24 Inch TVs for Kitchens, Dorms and Small Rooms
- Best Outdoor TVs: 5 Weatherproof Picks for Any Yard
- Best Projector Ceiling Mounts for Home Theaters in 2026
- Best Coaxial Cables: 5 RG6 Picks for TV, Antenna and Dish
- Ginasy Black Wide Leg Pants: Specs, Uses and Final Verdict