Key takeaways
- Compare five gaming projectors on input lag, refresh rate, brightness and throw distance, from a flagship BenQ LED model to a budget Optoma lamp pick.
The best gaming projector for most console players is the BenQ X3100i, because it is the pick here that pairs a complete per-mode input lag table, down to 4.2 ms at 1080p and 240 Hz, with the installation flexibility of a 1.3x zoom and vertical lens shift, a 4LED light source that never needs a lamp, and color coverage its maker rates at the full DCI-P3 gamut. A gaming projector is a different purchase from a home theater projector, and the difference is printed in two places on the specification sheet. The first is the input lag table, which has to be read mode by mode: every projector in this group advertises a headline lag figure near 4 ms, and every one of those figures belongs to a 1080p signal at 240 Hz, a mode current consoles cannot output and only a gaming PC can feed. At the 4K and 60 Hz signal a console actually sends, the honest figures in this group run from about 17 ms down to one maker that publishes no per-mode figure at all. The second place is the refresh rate ladder, because a projector that accepts 1440p at 120 Hz covers the performance mode that current consoles genuinely offer, while one that tops out at 4K and 60 Hz asks the player to choose between resolution and frame rate. Buy against those two checks, the lag at the signal the console sends and the refresh modes the projector accepts, and a gaming projector is a specification exercise. Buy on the headline 4 ms figure alone and the projector that arrives is a home theater model with a game mode sticker. As an Amazon Associate, we earn from qualifying purchases. The five products below were compared on published specifications only: input lag by resolution and refresh rate, accepted gaming signals, brightness, light source and its rated life, throw ratio and zoom, HDR formats, built-in audio and smart platform.
What separates these five is where each one spends its gaming budget. The X3100i is the premium pick, the complete specification: full lag table, lens shift, wide color and game modes tuned per genre. The Hisense C2 Ultra is the cinema-first pick, a triple laser design with Dolby Vision and the strongest built-in sound in this group, whose gaming sheet is real but thinner, with certification and high-refresh modes rather than a published lag table. The BenQ X500i is the short throw pick, the same lag ladder as its flagship sibling from a coffee table a few feet from the wall. The ViewSonic LX700-4K is the bright laser pick, the highest laser brightness here and an Xbox certification built around the 1440p and 120 Hz console mode. The Optoma UHD38x is the budget pick, the brightest sheet in the group from a lamp, with the same headline lag figures as the premium models and running costs that arrive later instead of up front.
Table of Contents
- Quick Answer
- How to Choose a Gaming Projector
- Quick Comparison
-
- BenQ X3100i True 4K 4LED Gaming Projector
-
- Hisense C2 Ultra Triple Laser Smart Projector
-
- BenQ X500i 4K HDR Short Throw Gaming Projector
-
- ViewSonic LX700-4K UHD Laser Gaming Projector
-
- Optoma UHD38x True 4K UHD Gaming Projector
- Before You Buy: Fit, Safety and Listing Checks
- Frequently Asked Questions
- Conclusion
Quick Answer
For the standard job, a console on a big screen in a dim room with a permanent place for the projector, buy the BenQ X3100i: its maker publishes the full lag ladder, 16.7 ms at 4K and 60 Hz, 8.3 ms at 1080p and 120 Hz and 4.2 ms at 1080p and 240 Hz, its 1.15 to 1.50 throw ratio with 1.3x zoom and vertical lens shift fits rooms the fixed-lens models cannot, and its 4LED source is rated for 20,000 hours with no lamp to replace. Buy the Hisense C2 Ultra when movies share the projector with games and the room is a living room rather than a theater, because it adds Dolby Vision, a 1.67x optical zoom on a tilting gimbal body and a 2.1-channel JBL sound system, accepting that its gaming case rests on Designed for Xbox certification, ALLM switching and a 240 Hz mode at reduced resolution rather than a published per-mode lag table. Buy the BenQ X500i when the room is small, because its 0.69 to 0.83 short throw ratio fills 100 in from roughly 6 ft while keeping the same 4.2 ms fastest mode and genre game modes as the flagship. Buy the ViewSonic LX700-4K when the room will not go dark and the console is an Xbox, because its laser source is rated at 3,500 lumens and its certification is built around the 1440p at 120 Hz mode consoles actually use, accepting that it carries no smart platform and no published 4K lag figure. Buy the Optoma UHD38x when the budget decides and brightness is the priority, because it publishes 4,000 lumens and the same 4.2 ms headline as the premium picks at the lowest tier here, paid for with a lamp that will need replacing and a long throw that needs a deep room. No projector here forgives the two failures that actually ruin a gaming setup: a lag figure read from the wrong row of the table, and a throw ratio that cannot fill the screen from the only shelf the room offers. Both checks are in the buying sections below.
How to Choose a Gaming Projector
Read the input lag table mode by mode, because the headline figure is never the console figure. Input lag is published per signal, and the ladder is consistent across this group: the fastest figure, 4.2 ms on four of these five, requires a 1080p signal at 240 Hz, which only a gaming PC produces. A current console outputs 4K at 60 Hz, or a performance mode at 1440p or 1080p at 120 Hz, and the lag at those signals is the lag the player feels. On the sheets here, 4K at 60 Hz runs 16.7 ms on the X3100i and the UHD38x and 16.9 ms on the X500i, figures that suit every console genre including fighting and rhythm games. The middle rung matters as much: 1080p at 120 Hz halves the 4K figure to about 8.3 ms on both BenQ models, which is the mode a competitive player will actually select. Two makers in this group do not publish the full ladder. ViewSonic publishes the 4.2 ms figure for the LX700-4K without a per-mode 4K figure on its specification sheet, and Hisense’s sheet for the C2 Ultra states game mode lag as a ceiling of 60 ms or less, which is a compliance figure rather than a measurement a buyer can compare. The discipline is simple: a lag number without its resolution and refresh rate beside it is marketing, and the comparison belongs to the row of the table that matches the signal the console sends.
Match the refresh rate ladder to the console, because 120 Hz is the mode that matters. Current consoles offer two relevant outputs: 4K at 60 Hz for fidelity modes and 1440p or 1080p at 120 Hz for performance modes. A gaming projector earns its name by accepting the second one natively. The LX700-4K and the C2 Ultra are both certified Designed for Xbox, a program whose projector requirements center on exactly that 1440p at 120 Hz combination, and both BenQ models accept 1080p at 120 Hz and 1440p input that is handled at 1080p. The 240 Hz modes that headline every sheet here are PC modes, useful to the player who connects a gaming PC and irrelevant to the console-only household, and no console game renders at 240 frames per second in any case. Variable refresh rate is the related absence to note: none of the five sheets in this group publishes VRR support, so a console’s VRR output falls back to a fixed refresh on every pick here, and a buyer for whom VRR is the point should be looking at a gaming TV or monitor rather than any projector in this roundup.
Decide the light source as a running-cost decision, because it outlives the purchase. Three technologies appear here and they age differently. The lamp in the UHD38x is rated at 4,000 hours in bright mode, 10,000 hours in eco and 15,000 hours in dynamic mode, and a lamp dims across that life before it fails, so the budget pick’s brightness advantage is largest on the day it is installed and its replacement cost is a certainty on a long enough timeline. The 4LED sources in the two BenQ models are rated at 20,000 hours in normal mode and 30,000 hours in eco, with no lamp to buy and slower brightness falloff. The laser sources in the Hisense and the ViewSonic sit in the same long-life class, rated at 20,000 to 30,000 hours depending on mode. For a projector used two hours a night, even the lamp figure is a decade of service, and the honest weight of this check falls on heavy users: a household gaming and streaming six hours a day consumes the lamp’s bright-mode life in under two years and the LED and laser lives in about nine. Light source is also a color decision, since the triple laser in the C2 Ultra is what buys its 110 percent of the BT.2020 gamut, a figure no lamp or LED model here approaches.
Measure the throw before anything else, because gaming rooms are rarely theater rooms. Throw ratio decides where the projector sits, and this group spans the full range. The X500i at 0.69 to 0.83 is a short throw design that fills a 100 in screen from roughly 5.5 to 6.5 ft, coffee table distance, which is why it is the small-room pick. The C2 Ultra’s 0.9 to 1.5 range on a 1.67x optical zoom is the most flexible here, and its gimbal body tilts the image onto the wall without a mount. The X3100i at 1.15 to 1.50 and the LX700-4K with its 1.36x zoom are standard throw designs needing roughly 10 to 13 ft for 100 in. The UHD38x at 1.50 to 1.66 is the longest throw here and needs the deepest room of the five. Zoom range is the second figure, because it is the tolerance in the placement: a 1.3x or wider zoom forgives a shelf that is a foot off the ideal distance, while the image size from a fixed position is set by the ratio alone. Lens shift, published only for the X3100i in this group at 40 to 60 percent vertical, is the feature that corrects placement without keystone correction, and keystone is the correction a gaming buyer should avoid, because digital keystone processing is disabled or restricted in the low-lag modes of several models here, which means a projector that needs keystone to fit the screen may lose its fastest modes doing it.
Check the audio path and the smart platform, because a console setup has two different jobs. For movies and streaming, the projector either is the streamer or it is not. The X3100i and the X500i carry Android TV on BenQ’s streaming dongle, and the C2 Ultra carries Hisense’s VIDAA platform with Netflix built in, so those three play streaming apps with the console off. The LX700-4K and the UHD38x publish no smart platform at all, which costs the console household nothing, since the console itself is a full streaming device, and costs a console-free room a separate streaming stick. Built-in sound follows the same split. The C2 Ultra’s 2.1-channel JBL system with an integrated subwoofer is the only built-in audio here that stands as a system rather than a convenience; the two BenQ models carry a pair of 5 W chamber speakers each, adequate for a bedroom and a placeholder in a theater. The figure that matters for a soundbar or receiver is the return channel: eARC appears on the X3100i, the X500i, the LX700-4K and the C2 Ultra, which is what lets the projector pass full-quality audio from its own apps and its other inputs down one cable to the sound system.
Read the HDR and color lines for the movie half of the projector’s life. Every pick here decodes HDR10 and HLG. The C2 Ultra stands alone on Dolby Vision, the dynamic format that adjusts tone mapping scene by scene, and on IMAX Enhanced certification. Color coverage separates the group in the same order as price tier: the X3100i publishes 100 percent of DCI-P3, the C2 Ultra publishes 110 percent of the wider BT.2020 gamut, the X500i publishes 84 percent of DCI-P3, and the two remaining models publish Rec.709-class coverage. None of these figures changes how a game plays; they decide how the same projector handles a film on the nights it is not gaming, and they are the reason the premium tier exists in a roundup whose headline specification is measured in milliseconds.
Quick Comparison
| Product | Tier | Brightness | Light Source | Fastest Published Lag | Lag at 4K, 60 Hz | Throw Ratio |
|---|---|---|---|---|---|---|
| BenQ X3100i | Premium | 3,300 ANSI lumens | 4LED | 4.2 ms at 1080p, 240 Hz | 16.7 ms | 1.15 to 1.50 |
| Hisense C2 Ultra | Premium | 3,000 ANSI lumens | Triple laser | 240 Hz mode at 2K input | Not published per mode | 0.9 to 1.5 |
| BenQ X500i | Mid-range | 2,200 ANSI lumens | 4LED | 4.2 ms at 1080p, 240 Hz | 16.9 ms | 0.69 to 0.83 |
| ViewSonic LX700-4K | Mid-range | 3,500 ANSI lumens | Laser | 4.2 ms at 1080p, 240 Hz | Not published per mode | 1.1 to 1.5 class, 1.36x zoom |
| Optoma UHD38x | Budget | 4,000 ANSI lumens | Lamp | 4.2 ms at 1080p, 240 Hz | 16.7 ms | 1.50 to 1.66 |
1. BenQ X3100i True 4K 4LED Gaming Projector
Specs
- Resolution: 4K UHD, 3840 x 2160, via pixel shifting on a DLP chip, per the maker
- Brightness: 3,300 ANSI lumens, per the maker
- Light source: 4LED, rated 20,000 hours in normal mode and 30,000 hours in eco mode, per the maker
- Input lag: 16.7 ms at 4K and 60 Hz, 8.3 ms at 1080p and 120 Hz, 4.2 ms at 1080p and 240 Hz, per the maker
- Color: 100 percent of the DCI-P3 gamut, CinematicColor, per the maker
- HDR: HDR10 and HLG, with HDR-PRO tone mapping and per-genre HDR game modes, per the maker
- Throw and lens: 1.15 to 1.50 throw ratio, 1.3x zoom, vertical lens shift of 40 to 60 percent, per the maker
- Audio: two 5 W treVolo chamber speakers, eARC and S/PDIF output for external audio, per the maker
- Smart platform: Android TV on the included streaming dongle, per the maker
- Dimensions: 10.7 x 10.2 x 8.4 in (W x D x H), per the listing data reviewed
- Weight: 13.2 lb, per the listing data reviewed
What the specs say
The X3100i is the default pick because it is the only projector in this group whose sheet answers every gaming question a buyer can ask. The lag table is complete and published per mode, and it is the table that matters: 16.7 ms at the 4K and 60 Hz signal a console sends in fidelity mode, 8.3 ms at 1080p and 120 Hz for performance modes, and the headline 4.2 ms at 1080p and 240 Hz held in reserve for a gaming PC. The game modes are organized the way the category should be, with separate presets for first-person shooters, role-playing games and sports titles, each carrying its own picture and latency settings, plus a crosshair tool for shooter play. The installation sheet is the second half of the case. A 1.15 to 1.50 throw ratio with 1.3x zoom covers the shelf and ceiling positions of an ordinary room, and the 40 to 60 percent vertical lens shift is the only true lens shift in this group, which means the image can be squared to the screen optically instead of by keystone processing that low-lag modes restrict. The 4LED source removes the lamp from the ownership equation entirely at 20,000 rated hours, and the color line, the full DCI-P3 gamut with HDR-PRO tone mapping, is the strongest movie specification of any LED model here.
Where it fits
Choose it for the dedicated gaming setup that also serves as the household’s theater: a console and a gaming PC sharing one screen, a room 10 to 15 ft deep that can take a standard throw, light controlled well enough that 3,300 lumens is ample, and a player who switches between fidelity and performance modes often enough to use the full lag ladder. It is also the pick for the buyer mounting once and not returning to the ceiling, because lens shift and zoom are the two features that forgive a mount placed by measurement rather than by trial.
Trade-offs
The premium tier is the price of the complete sheet, and two absences mark its generation. There is no Dolby Vision, so the dynamic HDR format belongs to the Hisense alone in this group, and the HDMI bank is a 2.0b bank: 4K input tops out at 60 Hz, so the console’s 120 Hz output is accepted at 1440p and 1080p rather than at 4K, a ceiling shared by every projector here but worth naming on the flagship. The Android TV platform arrives on a separate streaming dongle that occupies an input and its own remote logic, a workable arrangement that is visibly less integrated than the Hisense’s built-in system. And 3,300 lumens, while strong for a controlled room, is not the brightest sheet here; a bright living room is the LX700-4K’s and the UHD38x’s argument, not this one’s.
2. Hisense C2 Ultra Triple Laser Smart Projector
Specs
- Resolution: 4K UHD, 3840 x 2160, via pixel shifting on a DLP chip, per the maker
- Brightness: 3,000 ANSI lumens, per the maker
- Light source: triple color laser, rated 25,000 hours or more, per the maker
- Contrast: 2,000 to 1 native, per the maker
- Color: 110 percent of the BT.2020 gamut, per the maker
- HDR: Dolby Vision, HDR10 Plus, HLG and IMAX Enhanced certification, per the maker
- Gaming signals: 4K at 60 Hz, and 120 Hz and 240 Hz at 2K input, with ALLM and Designed for Xbox certification, per the maker
- Input lag: the maker’s specification sheet states game mode lag as 60 ms or less and publishes no per-mode table
- Throw and lens: 0.9 to 1.5 throw ratio on a 1.67x optical zoom, gimbal body with 360 degree horizontal rotation and 135 degree vertical tilt, per the maker
- Image size: 65 to 300 in, per the maker
- Audio: 2.1-channel sound by JBL, two 10 W speakers and an integrated subwoofer, per the maker
- Smart platform: VIDAA with Netflix built in, per the maker
- Dimensions: 9.7 x 9.7 x 11.3 in (W x H x D), per the maker
- Weight: 13.9 lb, per the maker
What the specs say
The C2 Ultra is the pick whose gaming specification has to be read for what it certifies rather than what it measures. What it certifies is substantial: Designed for Xbox status, which is Microsoft’s program for displays that handle the console’s resolution and refresh combinations, ALLM switching that moves the projector into its game mode when a console is detected, and a high-refresh path that accepts 120 Hz and 240 Hz at a reduced 2K input resolution on top of the 4K at 60 Hz base. What it does not publish is the per-mode lag table the BenQ and Optoma sheets provide; the maker’s own specification sheet states game mode lag as a ceiling of 60 ms or less, a figure too loose to compare against a 16.7 ms row, and a buyer whose purchase turns on competitive lag should read that absence as the deciding fact. Everywhere else the sheet is the strongest in this group. The triple laser’s 110 percent of BT.2020 is the widest color figure here by a wide margin, Dolby Vision and IMAX Enhanced are unique to this pick, the 1.67x optical zoom on a 0.9 to 1.5 throw range is the most placement range offered, and the gimbal body, rotating a full circle and tilting 135 degrees, aims the image from a sideboard or a coffee table with no mount and no fixed installation at all. The JBL 2.1-channel system with its integrated subwoofer is the only built-in audio in this group that a buyer could reasonably leave as the system’s sound.
Where it fits
Choose it for the living room that games and streams in roughly equal measure: a console under the TV position the projector replaces, movies that benefit from Dolby Vision and the wide laser gamut, no appetite for a permanent ceiling installation, and casual to committed console play rather than competitive ladder play. It is also the natural pick for the household that will not add a soundbar, because it is the one model here whose speakers were designed as a system.
Trade-offs
The gaming trade is the missing lag table, and it is a real one: the certification and the refresh modes are published, the milliseconds are not, and a competitive player is asked to buy on program badges where the BenQ models publish numbers. The 240 Hz mode arrives at a reduced 2K input rather than at 1080p or 4K, which is a different compromise from the BenQ ladder and should be compared as such. Brightness at 3,000 lumens is the lowest of the three premium and mid-range models here despite the laser source, so the bright-room argument belongs to the ViewSonic. And the cube body on its gimbal, for all its placement freedom, is a tabletop design; a ceiling installation is not its intended form, which closes the dedicated-theater route that the X3100i’s lens shift keeps open.
3. BenQ X500i 4K HDR Short Throw Gaming Projector
Specs
- Resolution: 4K UHD, 3840 x 2160, via pixel shifting on a DLP chip, per the maker
- Brightness: 2,200 ANSI lumens, per the maker
- Light source: 4LED, rated 20,000 hours in normal mode and 30,000 hours in eco mode, per the maker
- Input lag: 16.9 ms at 4K and 60 Hz, 8.3 ms at 1080p and 120 Hz, 4.2 ms at 1080p and 240 Hz, per the maker
- Color: 84 percent of the DCI-P3 gamut and 95 percent of Rec.709, per the maker
- HDR: HDR10 and HLG, with HDR-PRO tone mapping and per-genre HDR game modes, per the maker
- Throw and lens: 0.69 to 0.83 short throw ratio, 1.2x zoom, 100 in image from about 6 ft, per the maker
- Audio: two 5 W treVolo chamber speakers, eARC output, per the maker
- Smart platform: Android TV on the included streaming dongle, per the maker
- Dimensions: 14.4 x 4.6 x 9.6 in (W x H x D), per the maker
- Weight: 7.9 lb, per the maker
What the specs say
The X500i is the flagship’s gaming sheet in a smaller, closer body, and the comparison between the two BenQ models is the cleanest in this roundup because the maker publishes both the same way. The lag ladder is effectively identical: 16.9 ms at 4K and 60 Hz against the flagship’s 16.7, the same 8.3 ms at 1080p and 120 Hz, the same 4.2 ms at 1080p and 240 Hz, the same per-genre game modes and the same crosshair tool. What changes is everything about placement and light. The 0.69 to 0.83 throw ratio is a true short throw, filling 100 in from about 6 ft, which puts the projector on the coffee table in a bedroom or a small living room where the X3100i’s standard throw has no shelf to sit on. The 1.2x zoom preserves a useful measure of placement tolerance at that distance. The costs are printed in the same table: brightness falls to 2,200 lumens, the lowest in this group, and color coverage narrows to 84 percent of DCI-P3. The 4LED source and its 20,000 hour rating carry over unchanged, so the running-cost advantage over the lamp pick survives the step down in tier.
Where it fits
Choose it for the small room: a bedroom, a den or a dorm-scale living space where the screen wall is 6 to 8 ft from the only surface a projector can occupy, light can be controlled because the room is small and curtainable, and the player wants the flagship’s lag figures without the flagship’s throw requirement. It is also the pick for a setup that moves, since at 7.9 lb it is the lightest model here by a wide margin and a coffee table installation packs away in minutes.
Trade-offs
Brightness is the binding limit: 2,200 lumens is a dark-room specification, and a small room that cannot be darkened, a north-facing living room used at midday, defeats this pick where the ViewSonic’s 3,500 laser lumens would hold the picture. There is no lens shift, so at coffee table distance the image is squared by the projector’s feet and by keystone, with the low-lag caveat that keystone correction carries in this category. The color gamut is a genuine step down from the flagship for movie nights. And the short throw itself is a commitment: a room that later gains a ceiling mount and a longer layout has outgrown the lens, where the standard throw models move back and keep working.
4. ViewSonic LX700-4K UHD Laser Gaming Projector
Specs
- Resolution: 4K UHD, 3840 x 2160, via pixel shifting on a DLP chip, per the maker
- Brightness: 3,500 ANSI lumens, per the maker
- Light source: laser, rated 20,000 hours in normal mode and 30,000 hours in eco mode, per the maker
- Input lag: 4.2 ms at 1080p and 240 Hz, per the maker; no per-mode figure for 4K is published on the maker’s specification sheet
- Gaming signals: 4K at 60 Hz, 1440p at 120 Hz under Designed for Xbox certification, and 1080p at 240 Hz, per the maker
- HDR: HDR10 and HLG, per the maker
- Throw and lens: standard throw with 1.36x optical zoom and automatic horizontal and vertical keystone, per the maker
- Audio: built-in speaker, with eARC on one HDMI input for external audio, per the maker
- Smart platform: none published; an external source is required for streaming
- Dimensions: not stated in the data reviewed
- Weight: not stated in the data reviewed
What the specs say
The LX700-4K is built around the two figures a bright-room console player actually needs, and its sheet leads with both: 3,500 ANSI lumens from a laser source, the highest laser brightness in this group, and a Designed for Xbox certification whose tested combination is 1440p at 120 Hz, the performance mode current consoles genuinely output. Between those two lines it answers the living room brief directly, holding a watchable picture in a room that will not go dark and switching to the console’s high-refresh mode without a settings excavation. The laser’s rated life matches the LED models at 20,000 hours in normal mode, so the brightness does not come with the lamp pick’s replacement schedule attached. The sheet’s limits are of the same plain kind as the Hisense’s. The 4.2 ms figure is published for the 1080p and 240 Hz mode, and no per-mode lag figure for 4K at 60 Hz appears on the maker’s specification sheet, so the console’s main mode is unmeasured by the maker in a way the BenQ and Optoma models are not. There is no smart platform at all, and no Dolby Vision; the HDR line stops at HDR10 and HLG.
Where it fits
Choose it for the bright living room with an Xbox: lamps on, curtains imperfect, a console as the system’s only source, and play that values the 120 Hz performance mode over a published 4K lag figure. It is also the pick for the buyer who wants laser life and laser brightness at the mid-range tier and is willing to let the console, which is a complete streaming platform on its own, cover the smart half of the brief.
Trade-offs
The unpublished 4K lag figure is the standing caveat, and a player choosing between this model and the X500i at a similar tier is choosing between brightness with an unmeasured main mode and a dimmer projector with a complete table. The absence of a smart platform is a genuine cost in a console-free room, where a streaming stick becomes a required accessory rather than an option. Automatic keystone is the published alignment tool, and keystone in a gaming setup carries the category caveat: correction processing and the fastest modes do not always coexist, so the installation should be squared physically first and corrected digitally last. And the built-in audio is a single convenience speaker, the weakest sound provision here, which makes the eARC output and an external soundbar or receiver part of the real purchase.
5. Optoma UHD38x True 4K UHD Gaming Projector
Specs
- Resolution: 4K UHD, 3840 x 2160, via pixel shifting on a DLP chip, per the maker
- Brightness: 4,000 ANSI lumens, per the maker
- Light source: lamp, rated 4,000 hours in bright mode, 10,000 hours in eco mode and 15,000 hours in dynamic mode, per the maker
- Input lag: 16.7 ms at 4K and 60 Hz and 4.2 ms at 1080p and 240 Hz, in Enhanced Gaming mode, per the maker
- HDR: HDR10 and HLG, per the maker
- Throw and lens: 1.50 to 1.66 throw ratio, 1.1x zoom, per the maker
- Audio: built-in 10 W speaker, per the maker
- Smart platform: none published; an external source is required for streaming
- Dimensions: 12.4 x 8.8 x 4.5 in (W x D x H), per the maker
- Weight: 8.6 lb, per the maker
What the specs say
The UHD38x is the arithmetic pick of this group: the brightest published figure here, 4,000 lumens, a published lag table that matches the premium models row for row at the modes a console uses, 16.7 ms at 4K and 60 Hz and 4.2 ms at 1080p and 240 Hz under its Enhanced Gaming mode, and the lowest tier in the roundup. The mechanism behind the arithmetic is the lamp, and the sheet states its terms without disguise: 4,000 hours at full brightness, stretching to 10,000 in eco and 15,000 in dynamic mode, after which a replacement lamp is the cost of restoring the projector to its first-day output. Read as a whole, the specification is a trade of future running cost for present brightness and price tier, and for a light user the trade is heavily in the buyer’s favor, since 4,000 bright-mode hours is years of evening play. The rest of the sheet is the plain version of the category: HDR10 and HLG without Dolby Vision, a 10 W built-in speaker, no smart platform, and the group’s longest throw.
Where it fits
Choose it for the bright room on a budget: a family room that games in the evening and watches sports with the lamps on, a console as the source and streamer, and a buyer who would rather hold the group’s highest brightness now and accept a lamp replacement as a maintenance event years out. It is also the pick for a first projector in a deep room, where its 1.50 to 1.66 throw has the 13 ft or more it needs for a 100 in image.
Trade-offs
The lamp is the trade, stated in hours on the maker’s own sheet: brightness falls across the lamp’s life rather than holding near its rating the way the LED and laser sources do, and a heavy household can reach the bright-mode figure in under two years of daily use. The long throw is the second constraint, and it is unforgiving in a shallow room, where this is the one pick that cannot be made to fit by moving it closer. There is no smart platform and no eARC-class audio provision published at the level of the BenQ and ViewSonic models, so the external system carries more of the setup. And the Enhanced Gaming mode that produces the headline lag figures restricts some image processing while it is active, which is the standard category arrangement and one more reason the installation should be squared physically rather than corrected digitally.
Before You Buy: Fit, Safety and Listing Checks
Fit and Sizing Checks
Fit for a gaming projector is a chain of three measurements, all made from printed figures. First, the throw: the screen width multiplied by the throw ratio gives the distance range the lens needs, and in this group that range runs from the X500i filling 100 in from about 6 ft to the UHD38x needing roughly 13 ft or more for the same image, a spread wide enough that the room, not the budget, eliminates at least two of these five for most buyers. Second, the zoom tolerance around that distance: the C2 Ultra’s 1.67x optical zoom forgives the most placement error, the 1.3x and 1.36x zooms of the X3100i and the LX700-4K forgive a useful amount, and the UHD38x’s 1.1x zoom forgives least, so the long-throw pick also demands the most precise shelf or mount position. Third, the alignment method: lens shift on the X3100i corrects optically, the C2 Ultra’s gimbal corrects by aiming the body, and the remaining models correct by feet and keystone, with the gaming caveat that keystone processing can be restricted in low-lag modes, so a setup that only squares up under keystone may be trading away the lag figures it was bought for. A gaming projector that fits its room on paper and needs digital correction to sit square in practice has not fit.
Safety and Recall Checks
The recall check behind this roundup should be reported exactly as it stands: none of the five models here appears in CPSC recall notices in the records searched. The one current recall in the wider projector category covers a different product class: BenQ’s GV31 portable projector, a battery-powered mini model, was recalled in 2026 because its built-in lithium-ion battery can overheat. All five picks here are mains-powered projectors with no internal battery, the GV31 is not among them, and no BenQ model in this roundup is affected; the notice matters to this category only as a reminder that the battery portables are a separate class with a separate risk profile. The live safety discipline for these five is thermal and electrical, and it follows the makers’ manuals: a lamp projector like the UHD38x runs hot at its exhaust and needs the clearance its manual specifies, laser and LED models still vent heat and should not be sealed into unventilated cabinetry, and a projector that shuts down under thermal protection, smells of hot electronics or shows a damaged power cord comes out of service for inspection rather than being reset and reused.
Listing Checks
Four listing details deserve a second look. First, model generations with near-identical names: the Optoma UHD38x is a later revision of the UHD38, and the two are separate listings with separate identifiers, so the reference table’s row belongs to the UHD38x and the older model’s listing is not a substitute. Second, renewed listings: the Hisense C2 Ultra circulates in a renewed version under its own identifier beside the new listing, and the identifier in the reference table belongs to the new unit. Third, regional model names: the C2 Ultra is sold in some markets under a longer regional model string for the identical projector, and the specification figures in this roundup follow the maker’s sheet for the model named in the table. Fourth, specification conflicts in circulation: reseller pages disagree on several figures in this group, including the Hisense’s game mode lag, where the maker’s own sheet publishes only a ceiling figure, and the ViewSonic’s 4K lag, which the maker does not publish at all; where a reseller prints a precise number the maker does not, the maker’s sheet is the governing document and this roundup has followed it, recording the figure as not published rather than borrowing the reseller’s number.
Frequently Asked Questions
Which input lag figure matters for a games console, the 4K one or the 1080p one?
The 4K one, for most players, because 4K at 60 Hz is the signal a current console sends in its fidelity mode, and the figure at that signal is 16.7 ms on the X3100i and the UHD38x and 16.9 ms on the X500i. The 1080p figures govern the performance modes: at 1080p and 120 Hz the two BenQ models publish 8.3 ms, which is the mode a competitive player selects, and the 4.2 ms headline requires 1080p at 240 Hz, a signal only a gaming PC outputs. Two makers here, Hisense and ViewSonic, do not publish a per-mode 4K figure at all, and the honest comparison for a console-first buyer is between the models that publish the row and the models that ask to be bought without it.
Can a gaming projector work in a bright living room?
Two of these five are specified for it and three are not. The UHD38x at 4,000 lumens and the LX700-4K at 3,500 lumens are the bright-room sheets, and both hold a watchable game picture with lamps on and curtains imperfect, especially on screens at the smaller end of the range. The X3100i at 3,300 lumens and the C2 Ultra at 3,000 lumens are controlled-light projectors that tolerate some ambient light for sports and casual play. The X500i at 2,200 lumens is a dark-room specification outright. Screen choice moves the boundary as well: an ambient light rejecting screen, covered in this site’s projector screen roundup, buys back contrast in a lit room for any of the five, at the cost of a narrower viewing angle.
Do I need HDMI 2.1 on a gaming projector for a current console?
For projection, no, and the reason is the console’s own output menu. A current console’s high-refresh modes are 1440p at 120 Hz and 1080p at 120 Hz, both of which fit inside the HDMI 2.0 bandwidth that four of these five models carry, and the 4K signal tops out at 60 Hz on every console game. HDMI 2.1’s additional bandwidth buys 4K at 120 Hz, which no projector in this group can display in any case, since every model here accepts 4K at 60 Hz at most. The Hisense C2 Ultra carries HDMI 2.1 inputs, which future-proofs its switching, but the feature that decides console gaming today is not the HDMI version; it is whether the projector accepts the 1440p at 120 Hz mode natively, which is the tested core of the Designed for Xbox models here.
Lamp, LED or laser: which light source should a gaming household choose?
By hours and by habit. The lamp in the UHD38x is rated at 4,000 hours in bright mode and up to 15,000 hours in dynamic mode, and it dims as it ages and is replaced as a consumable; a household playing two hours a night may never replace it, and a household playing six hours a day will replace it inside two years at full brightness. The 4LED sources in the BenQ models and the laser sources in the Hisense and the ViewSonic are rated at 20,000 hours in normal mode and up to 30,000 hours in eco, with no consumable to buy and slower falloff, which is why they carry the higher tiers. Color rides along with the choice: the triple laser’s 110 percent of BT.2020 is the widest gamut here, the flagship LED’s full DCI-P3 coverage follows, and the lamp model’s coverage is Rec.709 class. A light user buying on brightness per tier takes the lamp; a heavy user takes the solid-state sources and never thinks about the light again.
Conclusion
A gaming projector purchase is judged by four matches: the input lag at the signal the console actually sends against the modes the player uses, the refresh rate ladder against the console’s 120 Hz performance mode, the throw ratio against the only placement the room offers, and the model string against the exact listing in the reference table. The BenQ X3100i is the default for the main gaming room, the complete published sheet with lens shift, full color and a lamp-free source. The Hisense C2 Ultra is the living room pick, Dolby Vision, the widest color and the only real built-in sound, bought on certification rather than a lag table. The BenQ X500i is the small-room pick, the flagship’s lag ladder from a coffee table 6 ft out. The ViewSonic LX700-4K is the bright-room Xbox pick, laser brightness and the console’s own 120 Hz mode at the mid-range tier. The Optoma UHD38x is the budget pick, the brightest sheet here with the same console-mode lag figures as the premium models, paid for in lamp hours. Read the lag table by mode, measure the throw, and the gaming projector is a specification exercise rather than a gamble.
- Best Soundbars for Gaming: PC and Console Picks 2026
- Best Projector Screens for a Cinematic Home Theater
- Best Portable Projectors: 5 Battery Picks for Travel
- Best OLED TVs for Movies, Sports and Gaming in 2026
- Best AV Receivers for Small Rooms: 5 Slim, Compact Picks
- Best Dolby Atmos Height Speakers: 5 Elevation Picks