Updated Nov 19, 2026· 5 min read

Key takeaways

  • Mounting Dream MD2163-K review: a fixed low-profile TV wall mount for 42 to 84 inch TVs up to 132 lbs, with VESA up to 600 x 400 and a 1.1 inch profile.

The Mounting Dream MD2163-K is a fixed TV wall mount built for one job: holding a large flat screen flat against the wall and keeping it there. The current Amazon listing rates it for most 42 to 84 inch TVs weighing up to 132 pounds, with VESA mounting patterns from 200 x 100 up to 600 x 400. It is a mounting accessory, not a television: a steel wall plate, two vertical TV brackets, and a finished gap of just 1.1 inches behind the TV.

That simplicity is the appeal and the limitation at the same time. There is no tilt, no swivel and no extension arm, so the viewing angle is set permanently by where the plate is bolted. In return, the mount is UL Listed, uses a heavily reinforced bracket structure per the listing data, fits wood studs spaced 16, 18 or 24 inches apart, and ships with pre-labeled hardware, a bubble level, and pull straps that lock and release the TV.

As an Amazon Associate, we earn from qualifying purchases.

Quick Answer

The MD2163-K suits a 42 to 84 inch TV that goes on the wall once, in front of fixed seating, and stays there. It carries up to 132 pounds, covers VESA patterns to 600 x 400, and leaves a 1.1 inch gap behind the screen. Choose a tilting or full-motion mount instead if you need to fight glare, angle the screen, or reach rear cables often.

Key Specs

Specification Detail
Brand Mounting Dream
Model MD2163-K (item model number MD2163-K-04 per the Amazon listing)
Mount type Fixed, low profile
TV size range 42 to 84 inches per the current listing title
Weight capacity 132 pounds (60 kg)
VESA compatibility 200 x 100 to 600 x 400 mm
Distance from wall 1.1 inches
Stud spacing 16, 18 and 24 inch wood studs
Wall types Wood stud and solid concrete; not for drywall alone
Material Steel, heavily reinforced bracket structure per the listing
Color Black
Item weight 4.91 pounds per the Amazon product information block
Included in the box Pre-labeled hardware bags, bubble level and pull straps per retailer listing data for this model
Certification UL Listed per the listing title
Warranty 10 years per the manufacturer’s published warranty terms

Check price on Amazon

Design and Installation

The MD2163-K is a two-piece design: a horizontal steel wall plate that bolts to the studs, and two vertical brackets that screw to the back of the TV and then hang and lock onto the plate. Retailer listing data notes automatic robot welding on the bracket, and the Amazon listing describes a heavily reinforced structure, which is where a fixed mount earns its 132 pound rating. Once hung, two pull straps release the lock so the set can be lifted off again without reaching tools behind the screen.

Installation is a one-time project with three checks that decide everything. First, confirm the TV’s VESA pattern falls between 200 x 100 and 600 x 400 and that the set weighs less than 132 pounds without its stand. Second, confirm the wall: the plate fits 16, 18 or 24 inch wood stud spacing, and the maker restricts installation to wood studs or solid concrete, never drywall alone; brand copy notes concrete anchors are available on request. Third, plan the cables before the TV goes up, because a 1.1 inch gap leaves little room to plug in an HDMI lead afterward. The included bubble level and pre-labeled hardware bags handle the leveling and fastener sorting.

Who It’s For and Who Should Skip

Who it’s for: Owners of large TVs, up to 84 inches and 132 pounds, who watch from one fixed seating position and want the screen parked almost flush to the wall. It also suits wide-stud rooms, since the plate spans 24 inch spacing narrower mounts cannot reach.

Who should skip: Anyone who needs to tilt the screen down from a high mounting position, swivel it toward a second seating area, or pull it out to swap cables. Those jobs need a tilting or full-motion mount. Skip it as well if your only wall is drywall without studs behind it, if your TV’s VESA pattern is larger than 600 x 400, or if the set weighs more than 132 pounds.

How It Compares to Other Mount Types

Against tilting mounts, the MD2163-K trades glare control for slimness: a tilting bracket angles the screen down and usually sits farther from the wall, while this fixed plate holds a tighter profile. Against full-motion mounts, it gives up swivel and extension arms entirely, but removes every joint that can sag or drift under a heavy TV. Against ultra-slim fixed mounts that sit even closer to the wall, it offers a higher weight rating and wider stud coverage at a slightly deeper gap. Against ceiling mounts and floor stands, it is the permanent option: it needs a suitable wall and frees the floor completely.

FAQ

Will the MD2163-K fit my TV?

It fits if three numbers line up: the screen measures 42 to 84 inches, the TV weighs no more than 132 pounds without its stand, and the rear mounting holes form a VESA pattern between 200 x 100 and 600 x 400. Pattern and weight matter more than screen size, so measure the hole spacing before ordering.

Can this mount be installed on drywall?

No. The manufacturer’s instructions restrict it to wood studs spaced 16, 18 or 24 inches apart, or to solid concrete walls. Brand copy notes concrete anchors are available on request. Drywall alone is not approved, because the fixings must carry the combined weight of mount and TV.

How far does the TV sit from the wall, and can I still reach the ports?

The finished profile is 1.1 inches. Side-facing ports stay reachable, but rear-facing ports are tight once the TV is hung, so connect cables before mounting, or use the pull straps to release and lift the set off the plate for access.

Does a fixed mount work above a fireplace or in a corner?

It holds the TV safely in either spot if the wall and studs check out, but it cannot angle the screen. Above a fireplace the screen stays flat and high, which many viewers find tiring, and in a corner it cannot turn toward the seats. A tilting or full-motion mount serves those positions better.

Final Verdict

The Mounting Dream MD2163-K does the fixed-mount job with unusually generous limits: 84 inches, 132 pounds, VESA to 600 x 400, and studs up to 24 inches apart, all at a 1.1 inch profile. Buy it when the TV’s position is settled and the wall is studs or concrete. Look at tilting or full-motion types instead when the seating, the light, or the cable box will ever ask the screen to move.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Mounting Dream MD2163-K Fixed TV Wall Mount ReviewCheck price on Amazon