Updated Nov 19, 2026· 12 min read

Key takeaways

  • Compare the best HDMI over ethernet extenders for long Cat5e and Cat6 runs, including 4K 60Hz range, HDR support, PoC power, IR control and KVM options.

Quick answer: For most home theaters, the OREI UHD-EX230-KVM is the strongest HDMI over ethernet extender here because it carries full 4K at 60Hz with 4:4:4 color up to 230 feet over a single Cat6 cable, with HDR formats, bi-directional Power over Cable and USB keyboard and mouse extension. The gofanco HD20Ext-Cas matches that 230-foot 4K range and adds receiver cascading, the J-Tech Digital HDBaseT kit is the dependable mid-range pick with RS232 control, the PWAYTEK 1×2 splitter extender feeds two displays from one source, and the Sabrent DA-4KEX suits shorter runs on a budget.

As an Amazon Associate, we earn from qualifying purchases.

Table of Contents

What an HDMI Over Ethernet Extender Does

A passive HDMI cable starts to struggle well before it crosses a large room, and long active HDMI cables get thick, stiff and hard to pull through walls. An HDMI over ethernet extender solves the distance problem with two small boxes: a transmitter that sits next to the source and a receiver that sits next to the TV or projector. The transmitter converts the HDMI signal so it can travel over a single run of Cat5e or Cat6 network cable, and the receiver converts it back to HDMI at the display. The network cable is not carrying internet traffic here. On most kits it is a dedicated point-to-point link between the two boxes, so the cable should run directly from transmitter to receiver rather than through a router or a home network switch.

Two broad technologies sit inside these kits. HDBaseT models send the video uncompressed, which keeps latency effectively invisible and preserves the full signal, and they often add extras such as RS232 control pass-through for projectors and screens. Newer HDMI 2.0 chipsets take a different route to the same goal and reach full 4K at 60Hz with 4:4:4 color and HDR over the same kind of cable. Either way, the headline numbers to read carefully are the resolution, the color format and the distance together, because the longest advertised range usually applies to 1080p while the 4K range is shorter. Cable quality matters as well: manufacturers consistently recommend solid copper Cat6 or better, terminated to the T568B standard, for the rated distances.

How to Choose

Start with the distance you actually need, measured along the cable path rather than in a straight line across the room, and add slack for bends and terminations. Then match the resolution and refresh rate of your source and display. A 1080p projector setup can use almost any kit here, while a 4K Blu-ray player or current game console needs a kit rated for 4K at 60Hz, and the difference between 4:2:0 and 4:4:4 color shows up in fine detail and PC text. Check HDCP support as well: HDCP 2.2 is the version current 4K streaming and disc content expects.

Next, look at power. Kits with Power over Cable, often shortened to PoC, need only one power adapter because one box powers the other through the network cable, which simplifies installs where the receiver hides behind a wall-mounted TV with no spare outlet. IR pass-through lets you point the source remote at the TV end and still control a player or cable box in another room, and bi-directional IR works in both directions. A loop-out port on the transmitter mirrors the source to a nearby display, which is handy for a local monitor. KVM models add USB ports at the receiver so a keyboard and mouse can control a computer at the far end. Finally, confirm whether the kit supports the HDR formats your TV uses, because some extenders pass HDR10 only and some pass none at all.

Quick Comparison

Product Tier Max resolution Rated distance Cable Standout features
OREI UHD-EX230-KVM Premium 4K at 60Hz, 4:4:4 Up to 230 ft Cat6 / Cat6a HDR10+, Dolby Vision, USB KVM, bi-directional PoC
gofanco HD20Ext-Cas Premium 4K at 60Hz, 4:4:4 Up to 230 ft Cat6 / Cat7 Loop-out, cascading receivers, bi-directional IR
J-Tech Digital JTECH-4K-EX-HDBaseT Mid-range 4K at 60Hz, 4:2:0 130 ft at 4K, 230 ft at 1080p Cat5e / Cat6 HDBaseT, RS232 pass-through, PoC
PWAYTEK PW-HT247P2IR Mid-range 4K at 60Hz Up to 196 ft Cat5e / Cat6 / Cat7 One transmitter feeds two receivers
Sabrent DA-4KEX Budget 4K at 60Hz 98 ft at 4K 60Hz, 197 ft at 4K 30Hz Cat6 / Cat6a / Cat7 IR pass-through, test cable included

1. OREI UHD-EX230-KVM 4K HDMI KVM Extender

Check price on Amazon

The OREI UHD-EX230-KVM is the most complete kit in this roundup. It is built on HDMI 2.0b with 18 Gbps of bandwidth, so it carries an uncompressed 4K signal at 60Hz with full 4:4:4 color up to 230 feet over a single Cat6 or Cat6a cable, the longest full-spec 4K range here. It supports the full spread of HDR formats found on current TVs and players, including HDR10, HDR10+, Dolby Vision and HLG, along with HDCP 2.2 for protected 4K content.

Because it is a KVM extender, the receiver adds two USB 1.1 ports for a keyboard and mouse, which makes it a good fit for a home office or a media PC stored in a rack or closet. Bi-directional Power over Cable means a single adapter at either end powers both boxes. The transmitter includes an HDMI loop-out for a local display, the receiver can de-embed analog audio through a 3.5 mm output for a soundbar or powered speakers, and EDID copy pass-through helps the source and display negotiate the right format. For a premium install that has to handle movies, games and a remote PC at once, this is the kit to start with.

Specs

  • Model: EX-230PRO-KVM (part number UHD-EX230-KVM)
  • Maximum resolution: 4K at 60Hz, 4:4:4
  • Transmission distance: up to 230 ft (70 m) over Cat6 or Cat6a cable
  • Bandwidth and standards: 18 Gbps, HDMI 2.0b, HDCP 2.2
  • HDR support: HDR, HDR10, HDR10+, Dolby Vision and HLG
  • Control and extras: USB 1.1 KVM (keyboard and mouse), bi-directional PoC, HDMI loop-out, 3.5 mm analog audio output, EDID copy pass-through
  • Tier: Premium

2. gofanco 4K 60Hz HDMI Extender (HD20Ext-Cas)

Check price on Amazon

The gofanco HD20Ext-Cas matches the OREI on headline range, extending 4K at 60Hz with 4:4:4 color up to 230 feet over a single Cat6 or Cat7 cable with near-zero latency as published by the manufacturer. It is an HDMI 2.0 design with HDCP 2.2 and 18 Gbps bandwidth, and it supports HDR, though the manufacturer notes that HDR10+ and Dolby Vision are not supported and HDMI CEC control is not passed through, so plan on it for HDR10 sources.

Where this kit stands out is distribution. The transmitter has an HDMI loop-out for a local screen, and additional receivers can be cascaded so one source can feed multiple remote displays along the run, up to ten receivers as published. Bi-directional IR lets remote control work from either end, and the surface-mountable metal housing suits tidy rack and behind-TV installs. The package powers each box with its own DC 5V adapter, so it does not rely on Power over Cable. For a long 4K run that may grow to a second or third display later, this is a flexible premium option.

Specs

  • Model: HD20Ext-Cas
  • Maximum resolution: 4K at 60Hz, 4:4:4
  • Transmission distance: up to 230 ft (70 m) over Cat6 or Cat7 cable
  • Bandwidth and standards: 18 Gbps, HDMI 2.0, HDCP 2.2
  • HDR support: HDR supported; HDR10+ and Dolby Vision not supported; HDMI CEC not supported
  • Control and extras: bi-directional IR, HDMI loop-out on the transmitter, cascading for up to ten receivers (extra receivers sold separately), metal surface-mount housing
  • Power: two DC 5V adapters included, one per box
  • Tier: Premium

3. J-Tech Digital 4K HDBaseT HDMI Extender (JTECH-4K-EX-HDBaseT)

Check price on Amazon

The J-Tech Digital JTECH-4K-EX-HDBaseT is a long-running HDBaseT design and the mid-range anchor of this list. HDBaseT carries the signal uncompressed over a single Cat5e or Cat6 cable, reaching 1080p at up to 230 feet and 4K at 60Hz with 4:2:0 color at up to 130 feet. It is compliant with HDCP 2.2 and 1.4, so current 4K sources handshake correctly, and it supports 1080p 3D for older projectors and players.

Installers like this kit for its control options. Bi-directional IR passes remote commands in both directions, an RS232 port passes serial control for projectors, motorized screens and automation systems, and PoC means the transmitter powers the receiver over the same cable, so only one adapter is needed. The trade-off to know before buying is HDR: the manufacturer states this model does not support HDR, so it suits SDR movie and TV sources, sports and presentations better than HDR disc playback. Within those limits it is a proven, straightforward extender.

Specs

  • Model: JTECH-4K-EX-HDBaseT
  • Maximum resolution: 4K at 60Hz, 4:2:0; 1080p with 3D support
  • Transmission distance: 4K up to 130 ft (40 m); 1080p up to 230 ft (70 m) over Cat5e or Cat6 cable
  • Standards: HDBaseT, HDCP 2.2 and 1.4
  • HDR support: not supported, as published by the manufacturer
  • Control and extras: bi-directional IR, RS232 pass-through, PoC (receiver powered by the transmitter)
  • Tier: Mid-range

4. PWAYTEK 1×2 HDMI Extender Splitter (PW-HT247P2IR)

Check price on Amazon

Most extenders feed one display. The PWAYTEK PW-HT247P2IR is a splitter extender set with one transmitter and two receivers, so a single source such as a cable box, streaming player or game console can drive two TVs in different rooms at the same time, each up to 196 feet away over its own Cat5e, Cat6 or Cat7 run. The kit supports video resolutions up to 4K at 60Hz, and the model designation and included accessories cover IR remote extension back to the source.

This is the practical pick for a living room TV paired with a kitchen, patio or bedroom screen that always shows the same content. The honest caveat is documentation: the listing data checked for this kit does not publish a detailed bandwidth figure, an HDR format list or an HDCP version, so buyers who need a specific HDR format confirmed should treat those points as unpublished rather than assumed, and the Specs block below says so plainly. For straightforward same-content distribution to two rooms at 4K, it fills a role none of the other kits here cover.

Specs

  • Model: PW-HT247P2IR
  • Configuration: one transmitter and two receivers (feeds two displays)
  • Maximum resolution: 4K at 60Hz
  • Transmission distance: up to 196 ft (60 m) over Cat5e, Cat6 or Cat7 cable
  • Control and extras: IR remote extension
  • Bandwidth, HDR formats and HDCP version: not published in the listing data checked
  • Tier: Mid-range

5. Sabrent 4K HDMI Extender Over CAT6 (DA-4KEX)

Check price on Amazon

The Sabrent DA-4KEX is the budget pick, aimed at shorter runs where the source and display sit in adjoining rooms or on opposite sides of one large space. It transmits over a single Cat6, Cat6a or Cat7 cable and supports HDMI 2.0 with HDCP 2.2. The distance ratings step down as resolution rises: up to 60 meters at 4K at 30Hz, and up to 30 meters at 4K at 60Hz, with 1080p covered across the longer range.

Sabrent includes thoughtful extras for a first install, including IR cables for remote pass-through and a one-meter Cat6 cable so the kit can be bench-checked before the long cable goes into the wall. Power comes from the included 5V DC adapter. Buyers should simply be realistic about the 4K at 60Hz ceiling of about 98 feet: for a console or 4K player that must sit farther from the TV than that, one of the 230-foot kits above is the better match, while for a short, simple run this kit covers the essentials for less.

Specs

  • Model: DA-4KEX
  • Maximum resolution: 4K at 60Hz
  • Transmission distance: up to 30 m (98 ft) at 4K at 60Hz; up to 60 m (197 ft) at 4K at 30Hz, over Cat6, Cat6a or Cat7 cable
  • Standards: HDMI 2.0, HDCP 2.2
  • Control and extras: IR pass-through with IR cables included; one-meter Cat6 test cable included
  • Power: 5V DC adapter
  • Tier: Budget

Fit and Compatibility Checks

Before ordering, walk the cable path and measure it, including vertical drops and the slack needed at both ends, then compare that figure against the rating for the resolution you will actually send, not the biggest number on the box. Use solid copper Cat6 or Cat6a cable for long 4K runs and terminate it to the T568B standard; stranded patch cords and copper-clad aluminum cable are common causes of flicker and dropouts at distance. Keep the run point-to-point: these kits expect the transmitter and receiver to connect directly, and plugging them into a home network switch will not work unless the model is specifically an AV-over-IP design.

Check the chain end to end. The source, the extender and the TV all need to agree on HDCP 2.2 for protected 4K content, and the TV input should be the enhanced-format HDMI port your set reserves for 4K at 60Hz. If HDR matters, confirm the exact formats: the OREI kit lists HDR10+ and Dolby Vision, the gofanco covers HDR without those two formats, and the J-Tech Digital kit passes no HDR at all. If the receiver will hide behind a TV with no free outlet, choose a PoC kit. Finally, test the full setup with the real cable before closing up walls, and keep a few feet of service loop at each end so the boxes can be swapped later without re-pulling cable.

FAQ

Will an HDMI over ethernet extender work through my home network switch or router?

No, not for the kits in this roundup. Despite the name, they use the Cat5e or Cat6 cable as a dedicated point-to-point link between their own transmitter and receiver, and the signal is not standard network traffic. The cable should run directly from one box to the other. Only extenders sold specifically as AV-over-IP models are designed to pass through a network switch.

Does the extender add lag for gaming?

HDBaseT and the direct chipsets used in these kits transmit with latency low enough that manufacturers describe it as near zero, and it is not noticeable in normal play or movie watching. The bigger gaming consideration is resolution support: a console sending 4K at 60Hz needs a kit rated for that signal at your cable length, which is why the rated distance at 4K matters more than the 1080p figure.

Can I use the Cat5e cable already in my walls?

Often, yes, at shorter distances. Cat5e is rated by several kits here for 1080p and for reduced 4K distances, but the longest 4K ranges are specified over Cat6 or Cat6a. If you are pulling new cable for a 4K setup, Cat6a is the safest choice, and solid copper conductors matter more than the category printed on the jacket.

Why does the picture drop out or sparkle on a long run?

The usual causes are cable-related: copper-clad aluminum cable, stranded patch cords used for the whole run, poor terminations, or a run that exceeds the kit rating for the resolution being sent. Re-terminating the ends to T568B, removing couplers, and testing with a short known-good Cat6 cable will isolate whether the problem is the cable or the kit.

Conclusion

An HDMI over ethernet extender is the cleanest way to put real distance between a source and a screen, and the right choice depends on three things: how far the cable runs, whether the signal is 4K at 60Hz, and which extras the room needs. The OREI UHD-EX230-KVM is the most capable all-rounder here, with full 4:4:4 4K at 230 feet, wide HDR support and KVM control. The gofanco HD20Ext-Cas matches its range and adds cascading for multi-display growth, while the J-Tech Digital HDBaseT kit remains a dependable mid-range option with RS232 control for SDR sources. The PWAYTEK set is the one to pick when two rooms must show the same picture, and the Sabrent DA-4KEX keeps shorter runs simple on a budget. Measure the run, match the kit rating to your resolution, and any of these five will carry the picture farther than an HDMI cable alone can manage.

A
admin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best HDMI Over Ethernet Extender Kits for Long…Check price on Amazon